C4002 MJX Newest Camera
Videography and Photography Function
Turn the switch button on Videography
module to the direction of the Videography icon, and then turn on the camera
switch of the remote control, it will start taking Videography and then light
of module keeps flashing. Press the camera button again, Videography taking
Turn the switch button on Videography module to the direction
of the photography icon, and then press the camera button on the remote
control to take photo. Each press takes one photo only.
After shooting is finished, take out the TF memory card from
the Videography module and insert it into the card reader, then, insert the
card reader into USB interface o the computer to watch the video and photo.
How to install the Videography device
Insert the TF memory card into the Videography module.
Fix the Videography module onto the bottom of the helicopter by screws
Open the helicopter nose and insert the plug of the Videography module into
the video control socket, and then, reinstall the helicopter nose.
1x 1GB memory card
1x card reader
To stop shooting, please press the
shooting switch on the remote controller. Directly unplug the battery cable or
take out the TF memory card from the Videography module will result in loss of
the video data.
To avoid helicopter crash, please do not insert or take out the
TF memory card from the Videography module, when the circuit is on. TF memory
card should be installed before circuit is on and take out after shooting
switch is turned off.
When crash occurs, turn off the helicopter and then turn on the
power to recover normal working.
This camera is upgraded from C4001, and it supports the function of Videography,
photography and sound recording.